AREA
70-400W
RC AREA LUMINAIRE
MH/HPS/SMH
ARM-MOUNTED AREA/SITE LUMINAIRE
23 7/8" [606mm]
10" [254mm]
8"
[203mm]
STREETWORKS™
15 1/2" [394mm]
IP65 RATED
HOUSING
ORDERING INFORMATION
SAMPLE NUMBER: RCL70SP23D4
Die-cast aluminum housing and
door. ANSI wattage/source label.
PRODUCT
FAMILY
RCL=Arm Mount
RCS=Slipfitter Mount
LAMP WATTAGE
70=70W
VOLTAGE 3
DISTRIBUTION
OPTIONS +
ACCESSORIES
(See Below)
LAMP TYPE 3
S=HPS
BALLAST TYPE 3
H=Reac./HPF
N=Hi. Reac./NPF
P=Hi. Reac./HPF
R=Reac./NPF
W=CWA
LENS
2=120V
1D=Type I MCO
Tempered glass lens.
10=100W
15=150W 2
17=175W
20=200W
25=250W
31=310W
40=400W
0=208V
R=SMH
2D=Type II MCO
1
4=240V
M=MH
3D=Type III MCO
REFLECTOR
AC=Area Cutoff-Type IV 4
7=277V
Hydroformed anodized aluminum
reflector.
8=480V
W=Multi-Tap wired 120V
F=120/240 wired 120V
P=240V
C=CWI
K=10KV CWA
SOCKET
Mogul-base porcelain lamp socket.
24=250/400W wired 250W
42=400/250W wired 400W
N=Multi-Tap wired 277V
V=Multi-Tap wired 240V
GASKET
The optical chamber is sealed with
a die-cut, dacron polyester gasket.
OPTIONS + ACCESSORIES [ Must be listed in the order shown and separated by a dash]
BALLAST
OPTIONS (add as suffix)
ACCESSORIES (order separately)
OA1224=TufGuard Vandal Shield
OA1016=105-285V Photocontrol
OA1013=Shorting Cap
Removable swing-down ballast
assembly available on arm mount
RCL only. Ballast standard hard
mounted in RCS slipfitter. Optional
hard mount ballast. (RCL only).
1=Single Fused, Internally Mounted (120 or 277V)
2=Double Fused, Internally Mounted (208, 240, or 480V)
4=Photocontrol Receptacle
WH=White
BK=Black
AP=Grey
V=External, Auxiliary Vandal Shield, 1/8" Thick Polycarbonate
B=House Side Cutoff
H=Plug-in Starter Receptacle
P=Prismatic Drop Lens
OA1027=480V Photocontrol
OA1061=Direct Mount Plate for Square Pole
OA1062=10" Arm for Square Pole (EPA .53)
OA1063=Direct Mount Plate for Round Pole
OA1064=10" Arm for Round Pole (EPA .53)
OA1065=Wall Mount Bracket
DOOR
Die-cast aluminum with
spring-loaded latches for toolless
entry.
OA1090=Adjustable Slipfitter for 2 3/8" O.D. Vertical Tenon
SLIPFITTER (RCS)
Optional internal slipfitter fits
1 1/4"-2 3/8" O.D. pipe.
R=Hard Mount Ballast (for arm mount fixture only)
T=Terminal Block
U=U.L. Listed
AIR=Arm Included for Round Pole
AIS=Arm Included for Square Pole
FINISH
Standard polyester powder coat
finish in bronze. For more color
options see optional colors or
consult your Streetworks
represenatitive for more
information.
OPTIONAL COLORS [ Standard color is bronze, other finish colors available. Consult your Cooper Lighting representative]
WH
BK
AP
White
Black
Grey
SHIPPING DATA
Approximate Net Weight:
46 lbs. (21 kgs.)
NOTE: 1 Hard mount ballast only. 2 150W HPS units are for S55 lamp. 3 Refer to technical section for lamp/ballast/voltage compatibility. 4 ED28 Lamp.
102 STREETWORKS Outdoor Lighting Solutions
Cooper Lighting
|
Cisco Systems Network Router 15454 SDH User Manual
COBY electronic TV Video Accessories MPC945 User Manual
Compaq Personal Computer AP230 User Manual
Cooper Lighting Indoor Furnishings VRGC User Manual
Craftsman Garage Door Opener 1393043 User Manual
Dacor Double Oven ROV230 User Manual
Digicom Network Router SNM50 User Manual
FUNAI VCR MFV260C User Manual
GE Monogram Oven ZET1RM User Manual
GE Monogram Refrigerator All Refrigerators and All Freezers User Manual